LA8AJA's homepage

Seems MMTTY has been updated. Still can’t find anything on the official website, and the download is from DXLabs and not the official page. First read this on contesting.no where LA6FJA posted it. Here are the release notes.

MMTTY version 1.66F release note

2008-08-17

1. Changes to the "MMTTY Setup" window

======================================

A. "TX" tab

– renamed the "PTT" panel to "PTT & FSK" (tnx to Joe W4TV)
– added com8 through com16 to the "PTT & FSK" panel’s "Port" selector
– clicking a button in the "Input Button" panel from a non-Japanese locale displays a window entitled "Edit Button" (tnx to Joe W4TV)

B. "Misc" tab

– the new "Device Identifiers" panel enables independent selection of soundcard devices for reception ("RX") and transmission ("TX"); any of 16 input and output soundcard devices can be selected (tnx to Gil W0MN and Joe W4TV)
– selecting an "RX" or "TX" device identifier in the "Device Identifiers" panel updates the respective "Reception" or "Transmission" panels shown on the new "Soundcard" tab

C. "Soundcard" tab (new)

– the "Reception" panel shows all installed soundcard input devices; selecting an input device updates the "RX" selector in the "Misc" tab’s "Device Identifiers" panel
– the "Transmission" panel shows all installed soundcard output devices; selecting an output device updates the "TX" selector in the "Misc" tab’s "Device Identifiers" panel

2. Changes to the "Radio Command" window
========================================
– added com8 through com16 to the "Port" selector
– added 38400 and 57600 to the "Baud" selector (tnx to Joe W4TV)
– named the selector in the lower-left corner "Group"
– modified the contents of the "Group" selector:
*** renamed the previous "Yaesu HF? (FT-1000MP,…)" entry to "Yaesu FT 1000D, 1000MP, 920"
*** renamed the previous "Yaesu VU? (FT-736,FT-847)" entry to "Yaesu FT 736, 817, 847, 857, 897"
*** added a "Yaesu FT 9000, 2000, 950, 450" entry (tnx to Joe W4TV and Art W2NRA)
*** renamed the previous "Kenwood" entry to "Kenwood, Elecraft" (tnx to Joe W4TV)
– renamed the "Commands" panel’s "VFO Polling" selector to "Model", and added entries for the Yaesu FT 9000, 2000, 950, and 450 (tnx to Joe W4TV)

3. Other notes
==============
A. As before, changes made to settings shown in the "Radio Command" and "MMTTY Setup" windows do not take effect until the window is closed by clicking its "OK" button.

B. To run MMTTY on Vista, either
– install it in a folder other than one in the "c:\program files" hierarchy
or
– log into the account named Administrator before installing or running MMTTY

C. 1.66F is a software-only upgrade, meaning that you must already have MMTTY installed. Updated online documentation is in progress; I will develop an installer for use with PCs that don’t yet have MMTTY installed. If you want to install 1.66F on a PC that doesn’t yet have MMTTY installed, first install version 1.65D, and then upgrade as described below.

D. To upgrade an existing MMTTY installation to 1.66F, download the zip archive from http://www.dxlabsuite.com/MMTTY/mmtty166F.zip

The archive mmtty166F.zip contains two files:
mmtty.exe and 1.66F.txt

Place mmtty.exe in your MMTTY folder, replacing the existing file, and then run it.
The file 1.66F contains a copy of this release note.

73,
Dave, AA6YQ
 

A short intro for those who don’t know MMTTY. MMTTY is a RTTY program that uses a pc soundcard, and does not need or use a tnc.
Link to MMTTY Page.